Anam Industries — Industrial & Agricultural Control Panel Manufacturer

Signature Feature

Inside The Panel

Every Anam panel is built from the same disciplined layout — hover any marker to see what's behind the door and why it matters.

Incoming Busbar

Tinned-copper busbars sized and torque-tested to the rated current — the backbone every feeder draws from.

MCCB / Protection

Correctly co-ordinated breakers so a downstream fault trips locally, not the whole panel.

Metering & Indication

Panel-door metering so your operator reads load, voltage and faults without opening the door.

Feeder Compartments

Individually isolated feeder ways — segregated per IEC 61439 for safe maintenance access.

PLC / Control Module

Where automation logic lives — sequencing, interlocks, and remote monitoring wired to spec.

Terminal & Wiring Bay

Numbered, ferruled wiring on every connection — the detail that makes fault-finding fast, years later.

Tap or hover any marker to see what's inside

Our Range

Panels Built For Every Line On Your Floor

View Full Catalog →

Power Distribution

PCC & MCC Panel

Power Control Centre and Motor Control Centre panels engineered for continuous-duty industrial power management.

View Panel →

Power Distribution

Distribution Panel

LT distribution panels that split incoming supply into clean, protected, individually-metered feeders.

View Panel →

Power Quality

APFC Panel

Automatic Power Factor Correction panels that hold your power factor near unity and cut demand penalties.

View Panel →

Automation

PLC Panel

PLC-based control panels for automated sequencing, interlocking and process control on the factory floor.

View Panel →

Motor Starting

Star-Delta & DOL Panel

Star-Delta and Direct-On-Line starter panels sized to bring your motors up to speed safely, every time.

View Panel →

Motor Starting

Star-Delta & DOL Starter

Compact starter units for single-motor applications where a full panel isn't required.

View Panel →

Protection & Switching

Auto Switch DOL/Semi

Automatic switching units for DOL and semi-automatic motor control with built-in protection logic.

View Panel →

Protection & Switching

Electronic Overload Protection Relay (O.P.R.)

Electronic overload protection with precision current monitoring — the relay that watches your motor's back.

View Panel →

Enclosures

Electrical Control Box

General-purpose control enclosures — the reliable housing for switchgear, relays and terminal assemblies.

View Panel →

Signature Feature

Live Panel Configurator

Build your spec in four steps — we'll turn it into a ready-to-send RFQ on WhatsApp, pre-filled with everything you selected.

1 · Panel Type

2 · Rating & Enclosure

3 · Application

4 · Your Spec Sheet

Step 1 — Select Panel Type

Panel Type—

Current Rating—

Enclosure—

Application—

Quantity—

Signature Feature

25 Years, One Factory Floor

Scroll through how a sheet of steel becomes a tested, export-ready control panel — the same process, refined over 25 years.

★

1998

Founded

Anam Industries begins panel fabrication in Bhuj, Gujarat — a small workshop, a handful of skilled hands.

○

Fabrication

Raw Sheet to Enclosure

CRCA sheet is cut, bent and powder-coated in-house to become the enclosure every panel starts as.

○

Assembly

Wiring & Busbar Fit

Busbars are torqued to spec, every wire ferruled and numbered — the stage where fault-finding gets built in, or doesn't.

○

Testing Bay

100% Functional Test

Every panel is insulation-tested, continuity-checked and functionally run before it's approved for dispatch.

★

ISO 9001

Certified Quality System

Our fabrication and testing process is certified under ISO 9001 — audited, documented, repeatable.

★

25+ Years

Export-Ready Manufacturing

Two and a half decades later, the same floor now dispatches custom-engineered panels to buyers across India and abroad.

See all our panels in motion — click to play with sound

From The Field

Buyers Who Run On Anam Panels

Real feedback from the factory floors, pump houses and plants our panels operate in every day.

Rajesh PatelPlant Head, Textile Manufacturing Unit, Surat

★★★★★

“Our MCC panel from Anam has run three shifts a day for over two years without a single unplanned trip. The fabrication quality shows the moment you open the door.”

Mahesh SolankiOwner, Ceramic Manufacturing Unit, Morbi

★★★★★

“We asked for a distribution panel that could be expanded later without a rebuild. Anam designed the busbar with spare ways built in.”

Vinod ChauhanFacility Manager, Agro-Processing Plant, Kutch

★★★★★

“Our monthly penalty for low power factor disappeared within the first billing cycle after installing Anam's APFC panel.”

Ashok RabariProduction Manager, Water Treatment Plant, Anjar

★★★★★

“Anam's team programmed the interlocks exactly to our SOP and stayed on call through commissioning.”

Kiran BhattOwner, Agro Pump Distribution, Bhuj

★★★★★

“We buy Star-Delta panels in batches for our irrigation clients. Anam's builds are consistent — same quality on unit one and unit fifty.”

Bharat SindhavMaintenance In-Charge, Manufacturing Unit, Gandhidham

★★★★★

“We retrofit Anam's O.P.R. units on our older starters instead of replacing them entirely. Precise trip settings, and support when we needed it.”

1998Founded in Bhuj

25+Years of Fabrication

ISO 9001Certified Facility

100%Factory-Tested Dispatch

Questions

Frequently Asked Questions

We manufacture PCC & MCC panels, distribution panels, APFC panels, PLC panels, Star-Delta and DOL panels/starters, auto switches, electronic overload protection relays, and electrical control boxes — all custom-engineered in-house.

Yes — send us photos or drawings of the existing panel and we'll match feeder layout, busbar rating, and enclosure style so it fits your existing installation and spares inventory.

Both. Many of our starter and control-box customers order single units; MCC and distribution panels are typically ordered per project, single or multi-unit.

Yes — feeder count, busbar rating, enclosure IP class, PLC/HMI make, and metering are all specified per order against a technical drawing before fabrication starts.

Within reason, yes. We regularly build with Siemens, Schneider, L&T, ABB and Delta components based on your preference and site standardisation.

Tell us the load list and application through the RFQ form — our engineering team will propose a configuration, standard or combined, before quoting.

Yes, Anam Industries is export-ready and has shipped panels internationally in export-compliant packing and documentation.

Export orders typically add 1–2 weeks over domestic lead time for export packing, documentation, and container/dispatch scheduling — confirmed at quotation stage.

We handle export-grade crating and can coordinate with your freight forwarder; Incoterms are agreed per order (EXW/FOB typical).

Yes, our manufacturing process operates under an ISO 9001 quality management system, covering incoming inspection through to final testing before dispatch.

Yes, a test certificate referencing your specific order and drawing number is issued on request with every dispatch.

Yes, our standard panel design references IEC 61439-1/2/3 as applicable to the panel type, alongside relevant IS standards for the Indian market.

Use the Live Panel Configurator on the homepage, any product page's WhatsApp RFQ button, or the contact form — include your load list or specification for the fastest, most accurate quote.

1–2 weeks for starters and control boxes, 2–4 weeks for distribution and APFC panels, and 3–6 weeks for larger MCC or PLC-automated panels, depending on feeder count.

Yes, we offer after-sales support and can discuss annual maintenance arrangements for larger installations — ask our team when you place your order.

Get A Quote

Send Us Your Load List — We'll Send Back A Spec & Price.

Download our full catalog PDF, or send your requirement directly and our engineering team will respond with a technical proposal.

📄 Download Full Catalog (PDF) Send Requirement →

Terms of Use

These Terms of Use govern access to the Anam Industries website and any enquiry, RFQ, or order placed through it. By using this site you agree to provide accurate company and contact details when requesting a quotation.

All panel specifications shown are indicative; every PCC, MCC, APFC, PLC, starter, and enclosure is custom-engineered to the final agreed drawing and Bill of Quantities signed off before production begins.

Product images and videos represent typical builds from our Bhuj, Gujarat facility. Actual internal layout, component brands, and finish may vary based on your final specification and component availability at order time.

Anam Industries reserves the right to update pricing, lead times, and specifications without prior notice; confirmed orders are governed by the specific commercial quotation and purchase order, not by this website.

Privacy Policy

We collect the information you submit through RFQ forms, WhatsApp enquiries, and the contact page — typically name, company, phone number, email, and product requirement — solely to respond to your enquiry and prepare a quotation.

We do not sell or rent contact information to third parties. Information may be shared internally with our sales and engineering team to prepare accurate technical proposals.

Enquiry data is retained for as long as reasonably needed to support your project and after-sales requirements. You may request deletion of your enquiry data at any time by emailing info@anamindustries.com.

Disclaimer

Anam Industries manufactures and exports industrial and agricultural electrical control panels. Installation, commissioning, and electrical safety compliance at the buyer's site remain the responsibility of a licensed electrical contractor engaged by the buyer.

Voltage, current, enclosure, and compliance figures listed on product pages are standard ranges; final ratings are confirmed on the technical drawing issued before manufacturing.

Anam Industries is not liable for damage arising from panel modification, incorrect site wiring, or use outside the agreed operating parameters by parties other than Anam Industries.

Quality Assurance Policy

Every panel is fabricated in-house at our Bhuj, Gujarat (GIDC) facility under our ISO 9001 quality management system, covering incoming material inspection, in-process fabrication checks, and final testing before dispatch.

Standard pre-dispatch checks include high-voltage insulation testing, continuity and torque-check of all busbar and wiring connections, functional testing of protection devices, and visual/dimensional inspection against the approved drawing.

A test certificate is issued with every panel on request, referencing the specific order and drawing number.

Warranty & Returns

Anam Industries panels carry a 12-month manufacturing defect warranty from the date of dispatch, covering fabrication, internal wiring, and busbar workmanship under normal operating conditions.

The warranty does not cover bought-out components (MCCB, relays, PLC modules, meters) beyond their respective OEM warranty terms, nor damage from incorrect installation, overloading beyond rated capacity, or unauthorised modification.

As every panel is custom-built to order, standard stock returns do not apply; any post-dispatch correction is handled case-by-case through our after-sales team on info@anamindustries.com.

Control panels engineered like your production line depends on it — because it does.

Inside The Panel